> Source: https://jakenfinancegroup.com/spec-home-construction-loans-washington-dc/

More than $535 million in real estate loans.

Washington, D.C. · DC Investor Guide

# Spec Home & New Construction Loans in Washington, D.C.

DC ground-up and spec-home construction financing by ward — RF-1 rowhouse by-right rules, DOB plan review, historic risk, and 8.99%–13.5% builder loans.

[Get Construction Terms](/newbuild/?source_page=spec-home-construction-loans-washington-dc&property_state=washington-dc&property_area=Washington%2C+D.C.) [Call (833) 264-7776](tel:8332647776)

Ground-up rowhouse and infill building in the District is a different game from a rehab. Your margin is set less by finish selections than by three things a suburban builder never touches: whether your lot is [matter-of-right RF-1](/row-home-financing-washington-dc/) or a Board of Zoning Adjustment problem, whether the [Department of Buildings](https://dob.dc.gov/page/overview-permitting-process-0) and Historic Preservation clear your plans in months or in quarters, and how much of your exit the District’s roughly 2.9% combined transfer and recordation tax quietly removes. This guide is for **investors and builders** running spec and build-to-rent new construction in DC — organized by ward — and it deliberately stays on ground-up, by-right territory so it complements rather than repeats the site’s [DC fix-and-flip permit guide](/washington-dc-fix-and-flip-permits-building-code-guide/), [ADU rules guide](/blog/dc-adu-rules-investor-guide/), and [English-basement ADU financing](/blog/dc-english-basement-adu-financing-2026/) articles. **This is educational information, not legal or investment advice.**

For the generic mechanics of construction draws, loan-to-cost, and as-completed value, see [our construction loan guide](/blog/guide-construction-loans/) and the [ground-up loans for first-timers](/ground-up-construction-loans-no-experience/) hub. If you are still choosing among spec, land, or a stalled build, start at [new construction loans for investors](/new-construction-loans-for-investors/). Pop-up versus raze versus ADU routing lives on [new construction loans Washington DC](/new-construction-loans-washington-dc/). DC is not a greenfield plat market. Small-lot work in Prince George’s, Loudoun, or Prince William belongs on [subdivision financing](/subdivision-development-financing/), not this ward guide. Everything below is DC-specific.

## Why build ground-up in the District in 2026

DC’s supply problem is structural. The desirable rowhouse fabric — Petworth, Columbia Heights, Trinidad, Eckington, Capitol Hill — is almost fully built out, so new detached inventory is scarce and new-construction rowhouses command a clear premium over rehabbed stock. A finished, code-current, warrantied rowhouse with modern systems sells to a buyer pool that will not touch a 1920s shell, and it appraises accordingly. The catch is that nearly every path to new inventory runs through a teardown or a rare vacant infill lot, and both carry entitlement friction that MD and VA suburbs simply don’t have.

That friction is the opportunity. Builders who can underwrite the raze permit clock, the RF-1 envelope, and historic risk correctly buy lots at a discount that reflects the difficulty — then capture the premium on the finished product. Builders who model DC like Prince George’s County get surprised at the closing table. The sections below are the variables that move a DC pro forma.

## How ground-up financing works here — the capital stack

Jaken Finance Group finances DC ground-up and spec construction as a business-purpose, **non-owner-occupied** loan against the lower of your loan-to-cost and your as-completed value. The generic draw mechanics — foundation, framing/dry-in, MEP rough, drywall/finish, CO — are covered in the [construction loan guide](/blog/guide-construction-loans/); the DC-specific point is that every draw is tied to a DOB inspection sign-off, and the raze/plan-review timeline sets how long your interest reserve has to last.

| Loan parameter | Ground-up / spec construction |
| --- | --- |
| Interest rate | 8.99%–13.5% interest-only on drawn balance |
| Term | 12–18 months IO (extensions available; BTR can run longer) |
| As-completed cap | Up to 75% of as-completed (LTARV) — fund the lower of LTC and LTARV |
| LTC — spec/repeat builder | 70%–80% of total cost |
| LTC — first-time / no experience | 65%–75% of cost |
| LTC — qualified files | Up to 90% general, up to 100% LTC on qualified files |
| Contingency | 10%–15% of hard-cost budget |
| Draws | 5–7 draws, funded 48–72 hours after third-party inspection |
| Close speed | 10–14 business days |
| Permanent DSCR takeout | 5.75%–10.5% at 1.0+ DSCR, 70%–75% LTV |

Two structural notes for DC. First, because plan review plus raze notice can eat two to four months before you pour, size your **interest reserve** toward the longer end — four to six months of carry — and don’t assume a spring start means a spring foundation. Second, never front-load draws: no single draw exceeding 20% funds before the foundation inspection passes, which matters on DC lots where excavation and underpinning against party walls is itself a cost center.

## Land and lot acquisition

Most DC ground-up deals start with a teardown or a scarce vacant infill lot, and lot basis is the single biggest swing in the pro forma. District lots run from roughly $175,000–$300,000 in lower-basis eastern wards to $1,500,000-plus in Georgetown and Capitol Hill (trade-aggregator range — verify with recent comps). Raw and entitled-lot acquisition can be financed through [vacant land and raw land financing](/vacant-land-loans-raw-land-financing-investors/), then rolled into the construction facility once permits are in hand.

Underwrite the acquisition-side **recordation tax** as part of land basis — the District charges it on the deed in, so a $450,000 lot carries roughly $6,500 in recordation before you’ve moved dirt. And confirm zoning before you sign: an RF-1 lot and an R-3 lot of identical size carry different lot-occupancy caps and different by-right unit counts, which changes the whole exit.

## Jurisdiction and permits — DOB, not DCRA

The permit authority is the **Department of Buildings (DOB)**, split out of the old DCRA in 2023. Building permits, plan review, and inspections sit with DOB; business and contractor licensing moved to the Department of Licensing and Consumer Protection (DLCP). Don’t file at the wrong agency.

New construction runs through two portals: the **Citizen Access Portal** (Scout/Accela) for initial intake on new construction and raze/demolition, and **ProjectDox** for uploading construction drawings for electronic plan review. Before filing you’ll verify zoning compliance with the DC Office of Zoning, obtain a **certified plat from the Office of the Surveyor** (required for essentially all exterior work), and — for a ground-up building — you’re advised to schedule a Preliminary Design Review Meeting to align on design and code early. An Environmental Intake Form determines whether an environmental screening (roughly 30 days) is required.

Plans then route in parallel across zoning, structural, mechanical/plumbing, electrical, fire, and green/energy, plus Historic Preservation, DDOT, and DC Health where triggered. Per DOB’s 2025 service levels:

| DOB plan-review milestone | Target (2025 service levels) |
| --- | --- |
| Reviewer assigned | ~2 days of application |
| First review completed | Within ~30 days |
| Re-review after resubmittal | Within ~15 days |
| Overall (simple to complex) | ~2–30 days per discipline; longer real calendar time for ground-up |
| Accelerated Plan Review | Expedited for a fee — surcharge up to ~50% of base permit fee |

The honest read: those are per-discipline targets, not the calendar time to a permit. A multi-discipline ground-up file with a resubmittal cycle and any Historic Preservation touch commonly runs several months from application to issued permit. The expedited **Accelerated Plan Review Program** can compress that when the carry math justifies the surcharge.

### The raze permit clock

If your deal is a teardown — most DC ground-up deals are — the **raze permit** is its own schedule item, and it is where inexperienced sponsors lose a quarter. Key facts to underwrite:

-   The building must be **unoccupied** before DOB issues a raze permit.
-   **Every raze application routes to the Historic Preservation Office** for clearance — historic or not.
-   The applicant must **post public notice on the building for 30 days**, and DOB must give the Advisory Neighborhood Commission **30 working days’ notice** (roughly 45 calendar days).

Add it up: the notice windows alone can add six weeks before you can demolish, on top of plan review for the replacement structure. This is real interest carry, and it belongs in the interest-reserve sizing — not discovered mid-deal. The [DC fix-and-flip permit guide](/washington-dc-fix-and-flip-permits-building-code-guide/) covers the rehab-side permit paths; the raze clock is the ground-up equivalent.

## Zoning and the RF-1 rowhouse envelope

The governing code is the **Zoning Regulations of 2016 (Title 11 DCMR)**, administered by the DC Office of Zoning. The 2016 rewrite renamed the residential zones: the old R-4 rowhouse zone became **RF-1 (Residential Flats)**, which is the core zone for most spec rowhouse and two-flat builders. Its by-right envelope is the box you build inside:

| RF-1 by-right standard | Value |
| --- | --- |
| Max height | 35 feet |
| Max stories | 3 stories |
| Max lot occupancy | 60% (row dwellings and flats) |
| Rear yard | 20 feet |
| Side yard | None required (attached row form) |
| Front setback | Contextual — within the range of existing setbacks on the block |
| By-right units | Detached, semi-detached, row dwellings, and a two-unit flat |

Two consequences dominate the DC ground-up exit. First, the **pop-up rule**: in June 2015 the Zoning Commission lowered by-right rowhouse height in R-4 (now RF-1) from 40 to 35 feet and capped it at 3 stories, specifically to curb tall pop-up additions. Thirty-five feet is still enough for a third story on a typical two-story rowhouse, but building to **40 feet now requires a special exception** from the Board of Zoning Adjustment — months of process and no guarantee.

Second, the **unit ceiling**: RF-1 tops out at a two-unit flat by right. Converting to **three or more units requires a BZA special exception** too. That single fact shapes nearly every spec exit in the RF zones toward either a single large rowhouse or a two-unit-flat/two-condo sale. If your pro forma assumes three or four for-sale condos out of an RF-1 lot, you don’t have a by-right deal — you have an entitlement play with a different timeline and risk profile. For the condo side of that exit, see [condo conversion financing](/condo-conversion-financing-washington-dc/).

A note on lower-density zones: **Subtitle D “R” house zones** (R-1, R-2, R-3) carry lower lot-occupancy caps — structures on lots under 5,000 sf may occupy up to 40% — so an R-3 lot builds a smaller footprint than an RF-1 lot of the same size. Confirm the zone on the DC Office of Zoning map before you underwrite square footage.

### Inclusionary Zoning — mostly not your problem

**Inclusionary Zoning (IZ)** sets aside 8%–10% of residential floor area as affordable in most new residential projects of **10 or more units**. Nearly every by-right rowhouse and two-flat spec build falls under that threshold and is exempt — a genuine advantage of staying small in DC. IZ+ can push set-asides toward 20% on upzoned or PUD sites where density exceeds the prior-zone maximum, but that’s an entitlement-scale project, not a spec rowhouse.

## Contractor licensing — DLCP, not DOB

Contractor licensing runs through **DLCP** via the Basic Business License system. For ground-up work you need the right endorsement, and most lenders — including Jaken Finance Group — require a licensed GC of record before releasing draws.

| License / requirement | Detail |
| --- | --- |
| General Contractor / Construction Manager (GCCM) BBL | Required for ground-up construction — license fee ~$654 |
| Home Improvement Contractor (HIC) BBL | Residential remodel/alteration — fee ~$288, requires a $25,000 surety bond |
| Clean Hands certificate | OTR certificate required for HIC (and generally) |
| Trades (electrical, plumbing/gas, mechanical) | Licensed separately through DLCP |

DLCP reportedly changed its license-period format effective August 1, 2025 (secondary source — confirm before relying on the date). Verify any builder’s license and bond through the DLCP Business Licensing Division before you fund. A GC’s license status is a draw-release condition, not a nicety.

## Fees that hit a DC ground-up budget

Three DC-specific line items deserve their own place in the pro forma.

**DOB permit fee.** DOB charges a building-permit fee scaled to declared construction value, with a plan-review add-on (commonly around half the base permit fee) and a filing deposit at application for new construction. Published bracket figures circulate from permit consultants but the primary DOB fee schedule is the authority — treat exact bracket cutoffs as unverified and confirm before locking a number. As a planning range, permits on a rowhouse ground-up commonly run **$10,000–$50,000** depending on scope and declared value (trade estimate).

**DC Water System Availability Fee (SAF).** A one-time connection charge on new service, assessed by meter size as a proxy for peak demand. A standard single-family **5/8-inch meter** is cited near **$3,944 combined** (water plus sewer) by a secondary source; larger meters — likely on a two-flat — scale up substantially. Critically, DC Water is revising the SAF under a 2026 cost-of-service study, so this figure is in flux: **verify the current amount at dcwater.com** before you commit it to a budget. DC Water offers a SAF credit per net affordable housing unit created.

**Transfer and recordation tax — the exit drag.** This is the DC number most out-of-town builders under-model. The District taxes both sides of the round trip:

| Transaction | DC deed tax |
| --- | --- |
| Purchase (recordation), consideration ≥ $400,000 | 1.45% |
| Purchase (recordation), consideration under $400,000 | 1.1% |
| Sale (transfer), consideration ≥ $400,000 | 1.45% |
| Combined round-trip context | ~2.9% across buy and sell |
| Commercial / mixed-use | 2.9% flat, regardless of price |

By local custom the buyer typically pays recordation and the seller pays transfer tax, split roughly evenly, but it is negotiable — and on new-construction sales, seller credits often push more of the burden onto the builder. Underwrite the seller-side transfer tax (~1.45% over $400,000) as a hard line item, and stress-test the scenario where you effectively eat closer to the full 2.9%. Confirm current rates on OTR Form FP-7/C. Also touching the exit: exterior work in public space — curb cuts, sidewalks, staging, vaults — needs separate **DDOT Public Space permits**, priced by use and area.

## Cost to build in DC

DC hard costs are among the highest in the region, driven by tight urban sites, party-wall underpinning, and labor. Use these as ranges, not survey precision — cross-check with a local GC bid.

| Cost input | Range (DC, 2025–2026 estimates) |
| --- | --- |
| Full-service new residential | ~$288–$332/sf incl. finishes |
| Lower-grade build (excl. site work, land) | ~$130–$230/sf |
| Rowhouse labor alone | ~$100–$200/sf |
| Total for a 2,500 sf home (land + construction + fees) | ~$500,000–$1,200,000+ |
| DC lot / land basis | ~$200,000–$1,500,000+ |

Ground-up runs higher per foot than a rehab because you’re carrying foundation, shell, and full systems rather than selective replacement — budget the whole envelope, not a cosmetic delta.

## Submarkets by ward

DC ground-up is a ward-by-ward business — land basis, buyer pool, and historic risk vary block to block. For neighborhood-level flip selection see [DC neighborhoods best for flipping](/dc-neighborhoods-best-for-flipping-2026/); the build thesis by ward:

| Submarket (Ward) | Build thesis | Value / land signal |
| --- | --- | --- |
| Petworth (Ward 4) | RF-1 rowhouses off Georgia Ave; classic infill and two-condo territory | Median home ~$715K; townhouse sales ~$510K–$1.395M |
| Columbia Heights (Ward 1) | Dense RF fabric near Metro; strong condo-conversion exits | Land-constrained, premium infill (band unverified) |
| Trinidad / Eckington (Ward 5) | Active teardown/infill near NoMa and Union Market; rising basis | Entitled lots marketed for rowhouse projects (bands unverified) |
| Anacostia / Congress Heights (Ward 8) | Lowest land basis; R-3/RF “blank canvas” lots; build-to-rent thesis | R-3-zoned rowhouse sites (basis unverified) |
| Capitol Hill / Hill East (Ward 6) | Historic rowhouse core; premium finished values, heavy HPRB review | Premium land; historic constraints material |

Only Petworth carries a primary-sourced 2025 price point; treat the other bands as directional and refresh with MLS and assessor comps before you underwrite dollar figures.

## Historic review — the biggest DC-only risk

The **Historic Preservation Review Board (HPRB)** reviews new construction, sizable additions, major alterations, and demolitions; the **Historic Preservation Office (HPO)** handles minor and delegated work, often same-day. The jurisdiction is broad: DC has on the order of **54 historic districts** and roughly **27,000 buildings** under HPRB purview (secondary counts — confirm with HPO), covering much of the most desirable rowhouse stock in Capitol Hill, LeDroit Park, Mount Pleasant, Anacostia, and beyond.

For a ground-up builder this cuts two ways. Every raze permit routes through HPO regardless of status, and demolition of a contributing or landmark building requires HPRB review and can be **denied outright** — with fines up to $25,000 for willful illegal demolition. In a historic district, your new building’s massing, materials, and street-facing design are subject to HPRB design review, which adds months and design cost. Verify a target lot’s historic status **before** you underwrite — it is the single biggest entitlement risk separating DC infill from the surrounding MD/VA jurisdictions, and the reason discounted-looking historic-district lots often aren’t discounts at all.

## Worked example — Eckington (Ward 5) raze-and-rebuild rowhouse

A repeat spec builder acquires a tired 2-story rowhouse on a raze path in Eckington, RF-1 zoned, and builds a new 2,600 sf, 3-story rowhouse to sell as a single-family home. Figures are illustrative.

| Line item | Amount |
| --- | --- |
| Land (teardown lot) | $425,000 |
| Recordation tax on purchase (1.45%) | $6,200 |
| Hard construction cost (2,600 sf @ ~$285/sf) | $741,000 |
| Soft costs (A&E, certified plat, DOB permits, legal) | $82,000 |
| DC Water SAF + DDOT public space | $12,000 |
| Contingency (12% of hard cost) | $89,000 |
| Total project cost (ex-interest) | ~$1,355,000 |

**Loan sizing.** As a repeat spec builder, LTC lands at 75% of cost = ~$1,016,000. The LTARV test is 75% of an as-completed value of $1,725,000 = $1,293,750. The loan funds the **lower** of the two, so LTC governs at ~$1,016,000, leaving roughly **$339,000 of sponsor equity** (~25%). At an 11.5% interest-only rate over a 14-month build with a partial-average drawn balance, budget **~$82,000** of interest carry from the reserve.

| Sell-out exit (as-completed $1,725,000) | Amount |
| --- | --- |
| Gross sale | $1,725,000 |
| Standard sale costs (8%) | −$138,000 |
| DC transfer tax, seller side (1.45%) | −$25,000 |
| Net proceeds | ~$1,562,000 |
| Loan payoff (principal $1,016,000 + interest $82,000) | −$1,098,000 |
| Net to sponsor | ~$464,000 |
| Less sponsor equity (~$339,000) | Profit ≈ $125,000 |

That’s roughly a 37% return on equity over 14 months — respectable, and it survives contact with the transfer tax. The sensitivity that matters: if seller credits push the builder toward absorbing closer to the full **2.9% combined** deed tax, another ~$25,000 comes off, trimming profit to roughly $100,000. That single line is why DC spec math must carry the transfer/recordation tax explicitly, not fold it into a vague “closing costs” plug.

## Worked example — Trinidad (Ward 5) two-flat, dual exit

Same builder, an RF-1 lot in Trinidad, builds a by-right **two-unit flat** (2,900 sf, two 1,450 sf units) with two exits on the table: sell as two condos, or hold as build-to-rent with a [DSCR](/dscr-loans-washington-dc/) takeout. The two-flat is by right; three units would trigger BZA, so the builder stays at two.

| Line item | Amount |
| --- | --- |
| Land | $285,000 |
| Recordation tax on purchase (1.1%) | $3,100 |
| Hard construction cost (2,900 sf @ ~$270/sf) | $783,000 |
| Soft costs (A&E, plat, permits, legal) | $72,000 |
| DC Water SAF (larger meter) + DDOT | $16,000 |
| Contingency (12% of hard cost) | $94,000 |
| Total project cost (ex-interest) | ~$1,253,000 |

**Loan sizing.** BTR/spec LTC at 75% = ~$940,000; LTARV at 75% of a $1,650,000 as-completed value = $1,237,500; fund the lower — $940,000, with roughly **$313,000 sponsor equity**. Interest-only carry at 11.5% over a ~14-month build runs about **$76,000**.

**Exit A — sell two condos at $825,000 each ($1,650,000 total):**

| Condo sell-out | Amount |
| --- | --- |
| Gross sale (two units) | $1,650,000 |
| Standard sale costs (8%) | −$132,000 |
| DC transfer tax, seller side (~1.45%) | −$24,000 |
| Net proceeds | ~$1,494,000 |
| Loan payoff (principal $940,000 + interest $76,000) | −$1,016,000 |
| Net to sponsor | ~$478,000 |
| Less sponsor equity (~$313,000) | Profit ≈ $165,000 |

**Exit B — hold as build-to-rent, DSCR takeout.** The two units rent at ~$3,500 each, $7,000/month, ~$84,000/year gross; net operating income around $58,800 after ~30% expenses. A permanent [DSCR loan](/dscr-loans-washington-dc/) prices at 5.75%–10.5% at 1.0+ DSCR and up to 70%–75% LTV — but here **income, not LTV, caps the loan**. At a ~7.25% permanent rate on 30-year amortization, holding to a 1.0 DSCR supports roughly a $720,000 loan; the 75% LTV ceiling ($1,237,500) is never the binding constraint. That DSCR takeout retires most, but not all, of the ~$1,016,000 construction payoff, so the builder leaves ~$300,000+ of equity working in a long-term hold.

The DC lesson is in the comparison: in much of the District, new-construction rents don’t fully support new-construction basis, so the for-sale condo exit frees more capital than the DSCR hold — while the hold offers durable cash flow and appreciation for a builder who wants to keep the asset. Both are legitimate; the [build-to-rent financing hub](/spec-home-build-to-rent-financing-for-builders/) covers the hold path in depth, and [investment property financing](/investment-property-financing-washington-dc/) covers the permanent side.

## Exit strategies — sell-out vs DSCR hold

| Exit | Best when | Watch-outs |
| --- | --- | --- |
| Single-family sell-out | RF-1 lot, strong owner-occupant ward (Petworth, Hill East) | Full 8% sale costs + seller transfer tax on one large ticket |
| Two-condo sell-out | Two-flat by right; condo-friendly submarket | Condo docs/legal; transfer tax on each unit sale |
| DSCR build-to-rent hold | Builder wants the asset; rents support 1.0+ DSCR | Income caps the loan below 75% LTV; equity stays in |
| Bridge-to-sale | Finished but slow market; need time | Short-term [bridge](/bridge-loans-washington-dc/) carry at 8.99%–13.5% |

For the rate-and-term mechanics of each product, [hard money lenders DC](/hard-money-lenders-washington-dc/) and [fix-and-flip loans DC](/fix-and-flip-loans-washington-dc/) cover the short-term side; the [Georgetown luxury new-construction](/luxury-new-construction-loans-georgetown-washington-dc/) page covers the high-basis end of the market.

## Common ground-up mistakes in DC

| Mistake | Consequence | Fix |
| --- | --- | --- |
| Modeling the exit before checking historic status | Raze denied or design forced; deal dies | Verify HPO/HPRB status pre-offer |
| Ignoring the raze notice clock | 6+ weeks of unbudgeted carry | Add ANC/30-day notice to interest reserve |
| Assuming 40 ft or 3+ units by right | BZA process kills the timeline | Underwrite to the RF-1 35 ft / two-unit box |
| Treating transfer tax as “closing costs” | ~2.9% surprise at exit | Line-item seller transfer tax in pro forma |
| Under-sizing the interest reserve | Cash call mid-build | 4–6 months carry given DC review time |
| Wrong-agency filing | Lost weeks | Permits at DOB; licensing at DLCP |

## How Jaken Finance Group structures DC construction draws

DC draws are tied to DOB inspection milestones, funded 48–72 hours after third-party inspection:

-   Hold vertical funding until the **building permit is issued** — after raze clearance and any HPRB sign-off.
-   **Foundation draw** on passed footing/foundation inspection — no draw over 20% before this milestone.
-   **Framing/dry-in**, then **MEP rough**, each on inspection sign-off.
-   **Drywall/finish**, then final draw at **CO**.

Plan **5–7 draws** on a $500K-plus vertical, with an interest reserve sized to DC’s longer review calendar. First-time DC builders should read [ground-up loans with no experience](/ground-up-construction-loans-no-experience/) and can lean on the shared [construction loan guide](/blog/guide-construction-loans/) for the underlying mechanics; the [new construction loans DC](/new-construction-loans-washington-dc/) page is the local product hub.

## Official resources

| Resource | Link |
| --- | --- |
| DOB — permitting overview / how to get a permit | [dob.dc.gov — permitting process](https://dob.dc.gov/page/overview-permitting-process-0) |
| DOB — get a raze permit | [dob.dc.gov — raze permit](https://dob.dc.gov/node/1616071) |
| DC Office of Zoning — Zoning Regulations of 2016 (Title 11) | [dcoz.dc.gov — ZR16 structure](https://dcoz.dc.gov/page/structure-zoning-regulations-2016) |
| DLCP — contractor / business licensing | [dlcp.dc.gov — business licensing](https://dlcp.dc.gov/service/business-licensing-division) |
| DC Water — System Availability Fee | [dcwater.com — SAF](https://www.dcwater.com/permits/content/system-availability-fee) |
| DC Office of Planning — Historic Preservation (HPRB/HPO) | [planning.dc.gov — HPRB review](https://planning.dc.gov/page/work-requiring-hprb-review) |
| DC Office of Tax & Revenue — recordation/transfer tax | [otr.cfo.dc.gov](https://otr.cfo.dc.gov/) |
| DHCD — Inclusionary Zoning for developers | [dhcd.dc.gov — Inclusionary Zoning](https://dhcd.dc.gov/service/inclusionary-zoning-residential-developers) — investor deal math: [DC Inclusionary Zoning guide](/blog/dc-inclusionary-zoning-investor-deal-math/) |

Confirm every dollar figure against the primary source before you lock a budget — DOB fee brackets and the DC Water SAF in particular are being restated/revised in 2026.

## Not sure which product fits?

If you’re weighing land loan, construction, bridge, or a DSCR hold, start with [what kind of loan do you need](/scenario/), then send the deal.

---

**Ready to build in DC?**

[**New construction application**](/newbuild/) · [**Submit scenario**](/submit-scenario/) · **(833) 264-7776**

---

_Rates, terms and conditions offered only to qualified borrowers and are subject to change at any time without notice. Closing times are in business days and commence upon receipt of appraisal payment and satisfaction of borrower conditions. All loans are subject to full underwriting for loan approvals. Jaken Finance Group only finances non-owner occupied investment properties._

## Related financing resources

Explore Jaken Finance Group programs and trusted reference material connected to this topic.

### On this site

-   [Washington DC investment property financing](/investment-property-financing-washington-dc/)
-   [Fix and flip loans Washington DC](/fix-and-flip-loans-washington-dc/)
-   [Hard money lenders Washington DC](/hard-money-lenders-washington-dc/)
-   [DSCR loans Washington DC](/dscr-loans-washington-dc/)

## More DC guides

-   [Row Home Financing Washington DC](/row-home-financing-washington-dc/)
-   [Best DC Neighborhoods for Flipping 2026](/dc-neighborhoods-best-for-flipping-2026/)
-   [Best Hard Money Lenders Washington DC 2026](/best-hard-money-lenders-washington-dc-2026/)
-   [DC BRRRR Strategy Guide](/dc-brrrr-strategy-guide/)
-   [TOPA & DOB Compliance Guide](/dc-topa-dob-investor-compliance-guide/)
-   [Condo Conversion Financing DC](/condo-conversion-financing-washington-dc/)
-   [Fix & Flip Permits & Building Code Guide](/washington-dc-fix-and-flip-permits-building-code-guide/)
-   [Assisted Living — DC Example](/assisted-living-financing-washington-dc/)
-   [Owner-Occupied Commercial — DC Example](/owner-occupied-commercial-loans-washington-dc/)
-   [Commercial — Maryland Example](/small-commercial-building-loans-maryland/)
-   [Recordation & Transfer Tax Guide](/dc-recordation-transfer-tax-investor-guide/)
-   [Rent Control Investor Guide](/dc-rent-control-investor-guide/)
-   [PadSplit & Co-Living Financing DC](/padsplit-financing-washington-dc/)
-   [House Hacking Washington DC](/house-hacking-washington-dc/)
-   [Mid-Term Rental Financing DC](/mid-term-rental-financing-washington-dc/)
-   [DSCR Loans Washington DC Condos](/dscr-loans-washington-dc-condos/)
-   [DC ADU English Basement Financing](/dc-adu-english-basement-financing/)
-   [DC Short-Term Rental Financing Guide](/dc-short-term-rental-financing-guide/)
-   [Portfolio Refinance Washington DC](/portfolio-refinance-washington-dc/)
-   [DC Mixed-Use Investor Financing Guide](/washington-dc-mixed-use-investor-financing-guide/)
-   [BEPS Building Energy Performance Guide](/dc-beps-building-energy-performance-investor-guide/)
-   [Historic Preservation & HPRB Guide](/dc-historic-preservation-hprb-investor-guide/)
-   [OTR Property Tax Guide](/dc-property-tax-otr-investor-guide/)
-   [How to Start Flipping Houses in DC](/how-to-start-flipping-houses-washington-dc/)
-   [Landlord-Tenant & Eviction Guide](/dc-landlord-tenant-eviction-investor-guide/)
-   [Rental BBL & RAD Registration Playbook](/dc-rental-bbl-rad-registration-guide/)
-   [Lead Paint & DOEE Compliance Guide](/dc-lead-paint-doee-investor-guide/)
-   [CRIAC & DC Water NOI Guide](/dc-criac-dc-water-investor-guide/)
-   [DOPA Investor Guide](/dc-dopa-investor-guide/)
-   [Bridge Loans DC Mixed-Use](/bridge-loans-washington-dc-mixed-use/)
-   [Government Contractor Financing DC](/government-contractor-financing-washington-dc/)
-   [SBA Loans Washington DC](/sba-loans-washington-dc/)
-   [C-PACE Financing Washington DC](/c-pace-financing-washington-dc/)
-   [Great Streets & DSLBD Stacking Guide](/dc-great-streets-dslbd-grant-private-capital-stacking-guide/)
-   [Industrial & Warehouse PG County](/industrial-flex-warehouse-loans-prince-georges-county-md/)
-   [Self-Storage Loans DMV](/self-storage-loans-dmv/)
-   [Restaurant Financing Washington DC](/restaurant-financing-washington-dc/)
-   [Daycare Financing Washington DC](/daycare-financing-washington-dc/)
-   [Business Acquisition Financing DMV](/business-acquisition-financing-dmv/)
-   [Medical Office Financing DMV](/medical-office-financing-dmv/)
-   [Greater DC Investor Market Report 2026](/greater-dc-investor-market-report-2026/)
-   [Mortgage Note Buyers Washington DC](/mortgage-note-buyers-washington-dc/)
-   [DC Tax Sale & Redemption Guide](/dc-tax-sale-redemption-investor-guide/)
-   [DC Foreclosure Investor Guide](/dc-foreclosure-investor-guide/)
-   [Vacant & Blighted Property Tax Guide](/dc-vacant-blighted-property-tax-class-investor-guide/)
-   [DC vs Suburbs BRRRR Guide](/dc-vs-suburbs-brrrr-guide/)

## Frequently asked questions

What is by-right on an RF-1 rowhouse lot in Washington, D.C.?

In the RF-1 Residential Flats zone a builder may put up a detached, semi-detached, or row dwelling — and a two-unit flat — by right, up to 35 feet and 3 stories, at 60% lot occupancy with a 20-foot rear yard. Building to 40 feet, or converting to 3+ units, requires a Board of Zoning Adjustment special exception. That two-unit ceiling shapes most spec exits toward a house or a two-condo sale.

How long does DOB plan review take for a new rowhouse in DC?

The Department of Buildings assigns a reviewer within about 2 days and, per its 2025 service levels, completes first review within roughly 30 days and re-reviews within about 15 days of each resubmittal. Multi-discipline ground-up files run longer in real calendar time once zoning, structural, MEP, fire, and Historic Preservation route in parallel. Underwrite months, not weeks.

What construction loan rate and leverage does Jaken Finance Group offer in DC?

Ground-up and spec construction is priced at 8.99%–13.5% interest-only on the drawn balance over a 12–18 month term, funding the lower of loan-to-cost and up to 75% of as-completed value. Spec builders typically see 70%–80% LTC, first-timers 65%–75%, and qualified files up to 100% LTC. All loans are business-purpose, non-owner-occupied only.

Does the DC transfer and recordation tax hurt a spec exit?

Yes. DC applies recordation tax on the purchase and transfer tax on the sale — roughly 1.45% each side on consideration of $400,000 or more, near 2.9% combined on a round trip. On a $1.6M spec sale the seller-side transfer tax alone is over $23,000, so it belongs in the pro forma alongside the standard 8% sale costs, not as an afterthought at closing.

What is the DC Water System Availability Fee on a new build?

The System Availability Fee is a one-time connection charge assessed by meter size on new service. Secondary sources put a standard 5/8-inch single-family meter near $3,944 combined water and sewer, with larger meters scaling up. DC Water is revising the fee under a 2026 cost-of-service study, so confirm the current schedule at dcwater.com before locking a budget.

Do I need a DC contractor license to build a spec home?

Ground-up construction requires a General Contractor/Construction Manager Basic Business License through DLCP, not DOB. Home Improvement Contractor work carries its own BBL plus a $25,000 surety bond and a Clean Hands certificate. Trades are licensed separately. Most lenders, including Jaken Finance Group, require a licensed GC of record on the file before releasing draws.

## Ready to fund your next deal?

Get pre-qualified in minutes. Speak with a lending specialist or submit your scenario online.

[Get Construction Terms](/newbuild/?source_page=spec-home-construction-loans-washington-dc&property_state=washington-dc&property_area=Washington%2C+D.C.) [Contact Us](/contact-jaken-finance-group-by-email/)

Or call [(833) 264-7776](tel:8332647776)
