Updated
Finance your next rental with a DSCR first mortgage that allows a second lien. Jaken Finance Group reviews eligible structures at 85%–90% combined loan-to-value. The first mortgage and the approved second share the property’s collateral, while the first remains senior. The combined limit does not tell you the approved first-loan amount or whether a particular seller note is acceptable.
Start with the entire transaction: property, supported rent, proposed first, proposed junior debt and cash available after closing. Eligible 1–4 unit rentals, multifamily with 5 or more units, and commercial properties can be reviewed under asset-specific terms. The exact property, first-lien LTV, minimum coverage and permitted subordinate financing require approval for the selected program. A workable spreadsheet is the beginning of that review.
Review my DSCR first loan with a second lien
Brokers can submit through Jaken Finance Group’s broker portal.
Separate the two leverage tests
First-lien LTV measures the first mortgage against the lender’s accepted property value. CLTV measures all included liens against that value. For a simple closed-end first and second:
CLTV = (first mortgage + subordinate balance) ÷ accepted value.
On an illustrative $500,000 property, a $400,000 first is 80% LTV. Add a $50,000 second and combined debt is $450,000, or 90% CLTV. A $25,000 second instead produces 85% CLTV. These are arithmetic examples, not offered first-lien terms or commitments.
Using a $500,000 purchase price and assuming value supports that price, the 90% example leaves $50,000 toward the price before costs. It does not demonstrate that the borrower meets a lender’s required cash injection or reserves. A lower accepted value can increase the cash needed or reduce available debt. Ask how purchase price, appraisal and transaction type determine the actual leverage denominator.
Fannie Mae’s CLTV guide illustrates the distinction between first debt and total liens. It is agency guidance, not evidence of eligibility for Jaken Finance Group’s offering.
Put both payments into the same model
Use the actual first-loan payment and complete second-note terms. Include taxes, insurance and association dues once, then add vacancy, management, maintenance and reserves in your investment budget. Adjust the second’s amortization and maturity; an interest-only payment can hide a large payoff later.
DSCR first mortgage + permitted subordinate financing
Model a DSCR loan with a second lien in place
See first-only and combined coverage, 85–90% CLTV and the cash left after both payments. A permitted second lien must be disclosed and reviewed.
Example assumptions only. All rates, leverage ceilings and coverage targets below are editable planning inputs, not quoted terms or approval criteria. Calculations run in your browser.
Edit the assumptions below to update your estimate. See the full breakdown and downside check.
Other liens, line exposure and net proceeds
Other balances are retained debt only. Do not include balances being paid off. Undrawn commitments are shown separately from drawn CLTV; ask the lender how lines and payments must be counted.
Complete the highlighted inputs with valid numbers to update results.
- First monthly P&I
- —
- Second monthly P&I
- —
- First-only coverage
- —
- Annual P&I + other debt service
- —
- Cash flow before the second / month
- —
- Net second-lien proceeds
- —
- Exposure including undrawn lines
- —
- First balance at maturity
- —
- Second balance at maturity
- —
What could constrain the second?
Capacity uses drawn CLTV and your selected coverage target. Full-commitment line rules may reduce it. It is not an offer or available loan amount. Consent, first-lien limits, borrower equity, reserves and lender-specific underwriting still apply.
Downside check
Income −10%, operating costs +10%, value −10%, second-lien rate +2 percentage points. Rate stress models a variable-rate reset or future refinance, not a change to an existing fixed note.
- Combined coverage
- —
- Cash flow / month
- —
- Combined LTV
- —
Each balloon is measured at that loan’s own maturity, assuming unchanged rates and payments. Modeled capitalized payment shortfalls are included; separate payoff accruals, fees and penalties are excluded. Net second proceeds subtract the entered costs, payoffs and funded closing reserves / holdbacks. Ongoing operating reserves used in cash flow are separate.
This models a DSCR first loan allowing subordinate financing. It is separate from our existing second-position DSCR cash-out program.
Save a scenario in the standalone DSCR subordinate-financing calculator. Use the first-and-second underwriting workbook to compare alternatives and the DSCR subordinate-financing checklist to prepare documents.
Read coverage and cash flow separately
For residential DSCR analysis, a common qualifying structure is accepted gross rent divided by first principal and interest, required second-debt payments, taxes, insurance and HOA dues. Lender definitions and qualifying payment rules control the actual decision. Do not calculate first-only coverage and assume it qualifies the entire debt structure.
Consider these illustrative monthly amounts:
| Item | Amount |
|---|---|
| Accepted rent | $4,800 |
| First principal and interest | $2,800 |
| Second required payment | $500 |
| Taxes, insurance and HOA combined | $700 |
| Vacancy allowance | $240 |
| Maintenance and management allowance | $720 |
First-only gross-rent coverage is $4,800 ÷ $3,500 = 1.37x. Including the second changes it to $4,800 ÷ $4,000 = 1.20x. After the modeled $960 vacancy and operating allowance, cash remaining is negative $160 monthly. That last result is an investment estimate, before income taxes and unmodeled capital costs. A ratio above 1.0 does not prove positive operating cash flow.
The Acra seller guide provides a residential lender example that includes applicable subordinate payments in rent-based coverage. Its rules do not set this offering’s approval thresholds.
Commercial and multifamily analysis often starts with lender-defined NOI or NCF and divides by total debt service. Those income measures already deduct specified operating expenses. Avoid subtracting those expenses twice. The mathematical method does not establish that a particular commercial or multifamily property qualifies for this DSCR offering.
Obtain approval for the actual junior debt
“A second mortgage” is insufficient detail for underwriting. Identify the creditor and whether the proposed loan is a seller carryback, institutional second or another structure. Provide the principal, rate, required payment, amortization, maturity, balloon, collateral and proposed lien priority.
The first lender must approve the specific junior debt and any required consent or intercreditor documentation. Read restrictions on additional debt and liens in the first-loan documents. A seller’s agreement to carry a balance does not supply first-lender approval. A deferred payment, future advance or balloon can change the review even when the balance stays the same.
Keep purchase terms and settlement figures consistent with the disclosed financing. The note and security documents should receive appropriate legal and title review. Disclose changes promptly; a revised second can alter coverage, leverage and closing requirements.
Stress the property before committing cash
Test a lower appraisal, a vacancy period and higher recurring expenses independently. In the $500,000 example, unchanged $450,000 debt against a $475,000 accepted value equals 94.74% CLTV. The original 90% calculation no longer describes the file.
For cash flow, replace optimistic rent with documented collections and supportable market rent. Model turnover, insurance renewal, tax changes and necessary repairs. Hold reserves for interruptions rather than treating every remaining dollar as available acquisition cash. If a balloon is due before the planned sale, test paying it without assuming appreciation or a future refinance.
If the numbers become too thin, compare a smaller second, a lower purchase price or additional borrower cash. Choose a structure that supports the property throughout the hold, including the junior note’s maturity.
Choose the correct Jaken Finance Group review
This new first-lien DSCR review is distinct from second-position DSCR cash-out. That existing program keeps the current first and adds a closed-end second of $125,000–$1,000,000, for eligible 1–4 unit rentals and warrantable condos, at maximum 80% CLTV and combined gross-rent/PITIA DSCR greater than 1.0. Do not transfer either program’s limits to the other.
This first-mortgage review also differs from the separate commercial/multifamily second-lien offering for $500,000+ second-loan requests. That amount is the junior loan, not a minimum for this DSCR first-mortgage offering. The two programs need separate reviews.
For a first-lien purchase or refinance with junior debt, send the property address and type, transaction summary, rent support, proposed first and second terms, estimated value, borrower contribution and available reserves. For a refinance, identify whether the existing second will be paid off or retained through approved re-subordination.
Submit the complete DSCR subordinate-financing scenario so Jaken Finance Group can evaluate the property and proposed financing together. Brokers: submit the disclosed structure here.
Sources and scope
- Fannie Mae: combined loan-to-value, for agency leverage terminology.
- Acra Lending: correspondent seller guide, for an example of residential DSCR treatment of subordinate debt.
- OCC: Commercial Real Estate Lending handbook, for commercial coverage and stress-analysis context.
Examples are educational estimates. Availability, accepted debt structures and final terms depend on the specific lender and file.